Animal Surgical Equipment Accessories
HARVARD BIOSCIENCE INC PE 160/10 TUBING 3M
Total order minimum requirement of $500. If only item on order, must order QTY of 17.PE-160 Polyethylene Tubing, 10 ft. L
MOLECULAR DEPOT LLC RF Purified 2500-4999 - 1 mL
High Rheumatoid Factor Solution Purified consists of a concentrated solution of human Rheumatoid Factors (2500-4999 IU/mL) that have been purified through several chromatography steps and supplied in buffer Titer has been measured with the RF Latex method This product can be used to test RF interference in immunoassays For in vitro research use only
Instech Co-extruded PE/PVC external infusion tubing. Polyethylene flow path for biocompatibility; PVC outside to minimize kinking. .024x.064in; fits 22ga. Clear. 30m (98ft) spool. Non sterile.
The Instech ABS2/TS062-W5 is a sterile tubing set for the ABS2 automated blood sampler, providing waste and fluid-path segments for drawing blood, returning IV fluid, and routing samples to the cooled collector. It also serves as replacement waste tubing segments and vials for maintaining system performance across mouse, rat, and large-animal ABS2 setups. Designed for accurate, low-loss sampling in closed-system PK workflows.
Features
- Sterile tubing set for ABS2 sampler
- Includes waste-path segments and vials
- Supports blood draw and IV return
- Low-loss routing for undiluted samples
- Compatible with multi-species ABS2 setups
Vetequip Inc MAPLESON 1/4 ID PVC TUBING
This item has a minimum qty of 35 per supplier requirements.
MAPLESON 1/4 ID PVC TUBING
Hach Company Replacement Sensor for Pocket Pro⁺ Multi 2 Tester (pH, Cond, TDS, Sal, Temp)
Replacement sensor pH, Conductivity, TDS, Salinity, Temperature
Instech Protective aluminum cap for magnetic rat Vascular Access Buttons (blue)
Instech’s protective aluminum cap for all VABR‑series rat Vascular Access Buttons are engineered with precision, snapping securely into place using magnetic attachment for fast, effortless handling. Its anodized blue finish not only delivers standout visibility but also supports group housing of catheterized rats—enhancing animal welfare without compromise.
Instech Mouse tail vein cannula, 29ga, 50cm PE-10 tube, PinPort and injector
The Instech C10SS-MTV2021P is a 29-gauge (29ga) stainless steel tail vein cannula for manual dosing or sampling in restrained mice. This model features a sharp needle tip for direct vessel access and a 5.9 in (15 cm) segment of PE-10 extension tubing. To facilitate a low-dead-volume closed system, it includes an integrated PinPort™ and an injector for aseptic access. Because it uses a sharp stainless steel needle, it is intended for immediate experimental use rather than long-term implantation. Each unit is individually packaged and EtO sterilized to maintain surgical-grade standards for laboratory research.
Features
- Vessel Application: Mouse tail vein
- Needle Gauge: 29ga (0.3mm OD) stainless
- Tubing: 5.9 in (15 cm) PE-10
- Access: Integrated PinPort™ and injector
- Tip Design: Sharp (non-implantable)
- Sterilization: Individually packaged, EtO
Instech Mouse tail vein cannula, 29ga, 5cm PE-10 tube, PinPort and injector
The Instech C10SS-MTV1826P is a 29-gauge (29ga) stainless steel tail vein cannula designed for manual dosing or sampling in restrained mice. This model features a sharp needle tip for direct vessel access and a 2.0 in (5 cm) segment of PE-10 extension tubing. To facilitate a low-dead-volume closed system, it includes an integrated PinPort™ and an injector for aseptic access. Because it uses a sharp stainless steel needle, it is intended for immediate experimental use rather than long-term implantation. Each unit is individually packaged and EtO sterilized to maintain surgical-grade standards for laboratory research.
Features
- Vessel Application: Mouse tail vein
- Needle Gauge: 29ga (0.3mm OD) stainless
- Tubing: 2.0 in (5 cm) PE-10
- Access: Integrated PinPort™ and injector
- Tip Design: Sharp (non-implantable)
- Sterilization: Individually packaged, EtO
Alzet ALZET Osmotic Pumps, Model 2006: 200 µl Volume, 0.15 µl/hr Release Rate, 42 Days Duration - for Orders of 10-40 Pumps
ALZET Osmotic Pumps are small infusion devices for accurate, continuous administration of test agents in unrestrained lab animals. They offer a convenient alternative for long-term dosing compared to stress-inducing methods such as injections and gavage. Pumps are sold empty and easily filled with the test agent via syringe. Their pumping rate is determined at manufacture and is not affected by the molecular weight of the test agent. Pumps are implanted subcutaneously or intraperitoneally for systemic delivery, or can be attached to an ALZET catheter for targeted delivery such as to the brafin, vasculature, etc. Sterilized by gamma irradiation and ready for use.Nominal Specifications for Model 2006:•Reservoir Capacity:200 µl•Release Rate:0.15 µl/hr•Duration:42 days•Minimum animal size:20 g mouse or ratNote: Actual specifications vary within limits by lot and are provided with the pumps.See other listings for additional pump models including shorter durations.
SAI Infusion Technologies Pre-filled Syringe - 10cc Syringe filled with 10ml Saline, 30/case
Sterile prefilled syringes save time and money in preclinical studies requiring repeated catheter access. These 10cc syringes are pre-filled with 10ml of 0.9% Sodium Chloride, 30/case. Product is for laboratory animal research only. ** If a COA is required it must be requested when the order is placed or a $50.00 fee will be apply. Contact Thermo Fisher Customer Service at 800-766-7000 to request to COA. **